PRAXIS - BOTTOM BRACKETS FOR SRAM DUB CRANKS
Our Praxis BSA threaded BB for SRAM® DUB™ cranks. Forged and machined cups finished and black anodizing. High-grade Enduro steel bearings are at the center of this BB.
|PRAXIS BSA BB for SRAM™ DUB 29mm spindle cranks into a BSA threaded frame
|VIEW MANUAL HERE
|BUY THIS IF :
|You are installing a SRAM™ DUB crank into a BSA threaded frame.
|Only for these exact SRAM DUB Crank setups :
73mm ROAD "Wide"
68mm MTN "Wide"
73mm MTN "Wide"
73mm MTN "SuperBoost"
|Must use a single M30 Socket Tool or M30 Wrench Tool for install/removal
VIP - This BB is *not* installed with SRAM Dub tool.
|Cartridge Steel | Enduro
These are specifically made for use with SRAM DUB/29mm crank spindles.
29mm Drive and a 29mm NonDrive Bearing
|Forged & machined heat-treated alloy cups
|DUB™ is a registered trademark of SRAM, LLC | SRAM® is registered trademark of SRAM, LLC
|RRP (Inc. GST)
|PRAXIS BSA - "DUB" 29 68/73MM ROAD/MTN BLK
© Copyright 2024 Marleen Wholesalers Ltd. All rights reserved. | Website by 72DPI