Derailleur Hangers
PILO - SMALL PARTS
HAN-S14:
This part will improve performance for road cyclists, by allowing a bigger rear cassette installation. Bolt included
Works with any 1-11 or 1-10 Drivetrain (42T max cassette, with a single chain ring crankset)
Crank should be with a single chain ring or a double chain ring where the difference between the plates sizes is 14T max (with an exception: works with a compact Shimano crank of 34-50T plates, 2-10 cassette 11-36)
In a double chain ring crankset there is a limitation of 40T rear cassette with Shimano and Sram, and 36T with Campagnolo.
HAN-S10:
This part is used on Shimano Shadow rear derailleurs starting 2013
Will fit a cassette size of 40T or bigger
Bolt included
Improves shifting performance on 1-10 systems
Increases chain wrap, eliminates the need to drastically thread in the b-tension screw
Replaces the Direct Mount link on 2013 or later Shimano 10-speed Shadow+ rear derailleurs to reduce premature shifting degradation
Works with any 11-40t or 11-42t 10-speed cassette
Code | Description |
---|---|
HAN-NB01 | NUT-BOLT FOR HANGER ATTACHMENT |
HAN-NB02 | BOLT FOR HANGER ATTACHMENT 8.5MM LONG |
HAN-S1 | Hanger - DT Swiss 12x142 Axle Lock Nut M12 x 1 Thread |
HAN-S2 | Hanger - DT Swiss 12x142 Axle Lock Nut M12 x 1.5 Thread |
HAN-S3 | Hanger - Sram and Shimano Axle Lock Nut M12 x 1.75 ISO Thread |
HAN-S12 | Hanger - D398 AXLE LOCK NUT M12 X 1.50 |
HAN-S13 | Hanger - D398 AXLE LOCK NUT M12 X 1.75 |
HAN-FS-5 | Frame saver / M10x1 thread replacement 5mm |
HAN-FS-7 | Frame saver / M10x1 thread replacement 7mm |
HAN-S10 | Hanger - Adaptor for Shimano Shadow Direct Link Rear Derailleur |
HAN-S14 | Hanger - Alpe D'huez Fairy - upgraded cassette adapter for road bikes |
© Copyright 2021 Marleen Wholesalers Ltd. All rights reserved. | Website by 72DPI