Fox - Transfer SL Dropper Posts

FOX - TRANSFER SL DROPPER POSTS 

At up to 167 grams (roughly 25%) lighter than the Transfer post, the Transfer SL is the lightest mainstream dropper post on the market. The two-position design means the dropper can be ridden as either fully extended or fully retracted with size/travel options from 27.2mm x 50mm up to 31.6mm x 150mm. With lever options for both flat bars and drop bars, the Transfer SL brings simplicity and lightweight performance to Trail, XC and Gravel disciplines.
 

SPECS

• Up to 167g lighter than Transfer - Titanium hardware on Factory level posts for 10g weight savings
• 2-position mechanical post that locks at the top and bottom only.
• Coil spring for consistent return performance.
• Internal routing only.
• 27.5, 30.9 and 31.6mm diameters.
• 75, 100, 125, and 150mm drop options.
• 70-85deg seat angles are supported.
• 7mm and 7x9 'Ob-round' saddle rails supported.
• Available in Factory and Performance Elite Series. (Factory post includes Ti hardware for additional 10g weight savings)
• Longer travel configurations offer exposed length of 290mm for taller riders. Shorter travel configurations offer shorter total length for smaller riders.
• Reduced overall length and insertion depth:
  • 27.2 x 50mm, 80mm min insertion, 248mm max insertion, 350mm extended length, Starting Weight: 327g
  • 27.2 x 70mm, 80mm min insertion, 248mm max insertion, 370mm extended length, Starting Weight: 338g
  • 30.9/31.6 x 75mm, 80mm min insertion, 225mm max insertion, 355mm extended length, Starting Weight: 342g/352g
  • 30.9/31.6 x 100mm, 80mm min insertion, 225mm max insertion, 380mm extended length, Starting Weight: 347g/359g
  • XL 31.6 x 100mm, 80mm min insertion, 275mm max insertion, 430mm extended length, Starting Weight: 399g
  • 31.6 x 125mm, 80mm min insertion, 275mm max insertion, 455mm extended length, Starting weight: 432g
  • 31.6 x 150mm, 80mm min insertion, 275mm max insertion, 480mm extended length, Starting weight: 437g
• Remote NOT included