Park Tool - CRP-2 - Universal Crown Race Puller

Frame & Fork Tools

Product Details

PARK TOOL - CRP-2 - UNIVERSAL CROWN RACE PULLER

The CRP-2 is a precision tool for quickly and easily removing the headset crown race from the crown race seat of the fork. The tool is fully adjustable, allowing precise, independent positioning of the blades around the crown race.
Locating each blade independently provides flexibility to fit around most potential interferences with fork top caps or crown protrusions.

Universal design works with 1”, 1-1/8”, 1-1/4” and 1.5 forks (suspension or rigid) and crown races with outside diameters up to 64mm
Accepts steering columns up to 430mm in length
All-steel construction for long life

Note: Blades are necessarily thin and will wear with use. Crown races with a tight press fit may also wear on blades. Replacement blades are available: Part #1155-3

Where to Buy

Code	Description	RRP (Inc. GST)	Availability
K-CRP-2	Park Tool Adjustable Crown Race Puller	$619.90	In stock
K-1158-3	Park Tool - NYLON WASHER - CM-25, CRP-2	$4.50	ETA 13 November 2026
K-1156-3	Park Tool - CRP-2 SET SCREW M8 X 20	$4.50	ETA 13 November 2026
K-110S	Park Tool BALL KNOB - CR-2, HHP-1 (pre-7/01), SS-1, 180, CRP-2	$12.90	In stock
K-1155-3	Park Tool BLADE (each)- CRP-2	$25.90	In stock
K-1159-3	Park Tool - CRP-2 Plunger Bolt	$26.50	ETA 13 November 2026
K-1163	Park Tool Part: Acme Rod for CRP-2	$29.90	Enquire Now
K-1167	Park Tool OUTER SHELL - CRP-1	$39.89	In stock
K-1154-3	Park Tool BLOCK - CRP-2	$81.90	In stock